Quality Bed Warmers Made In USA Since 1939

ElectroWarmth Guarantee

quality

Full Warranty

All products are fully warranted for one year. 30 day money back guarantee, No questions asked.

Low cost factory service available if ever needed.

Made of two sheets of fine weave, pre-shrunk polyester cloth quilted together with bonded polyester fill in between, similar to a high quality mattress pad. The closely quilted seams form tunnels that hold the heating element wires inside for uniform heat distribution. Our fitted units have a skirt (of approximate 14″) all the way around the pad with elastic sewn all the way around the skirt to keep the pad securely stretched out on the bed. This deep skirt allows them to fit the new deep pillow top mattresses. If needed a deeper skirt can be customized for you at an additional charge of $5.

ElectroWarmth® products are not assembled in, or imported from a foreign country. They are made in the USA, in our factory here in Ohio, which has been in continuous operation for over 67 years. You get durable, quality products, backed by direct factory service, if ever needed. When it gets really cold, no other bed warming product can put so much heat in the bed, so fast.

The rated volts, amps, and watts are shown in the table below.

The 12 volt Comfort Control thermostat cycles the warmth on & off at short intervals. It pulls full rated amperage only when cycled on. The amount of time it is cycled on versus off depends on the Comfort Control setting. Experience has shown that on average, it is cycled on less than 50% of the time. Since the rated amperage listed is maximum if it is on 100% of the time, the average load on the battery system is 50% or less of the rated amperage (reports of battery problems have been negligible in the 40 years we have made the 12 volt products).

Cord length is 3 feet 6 inches from warmer to Comfort Control and 6 feet 8 inches from control to electrical plug.

The 115 volt Comfort Control features quick warm-up on all settings, which include L for low, 2-9, and H for high. Depending on the setting you select, the control runs at maximum output for a period of time to quickly warm the bed. The automatic shut off feature gives you ten hours of continuous use before shutting off.
Cord length is 12 feet from warmer to Comfort Control, 6 feet 8 inches from control to electrical plug.

115 V Model Bed Warmers
Rated Maximum
Model Number Volts Watts Amps.
M30FL,M30FXL
115
55
0.5
M38F, M38FL, M38FXL
115
69
0.6
M54F, M54FL, M54FXL
115
111
1.0
M60F, M60FL, M66FL
115
99
1.0
M54FD, M54FLD
115
111
1.0
M60FD, M60FLD, M60FXLD, M66FLD
115
112
1.0
M72FXLD
115
133
1.2
M76FLD, M76FXLD
115
133
1.2
Cord length is 12 feet from warmer to Comfort Control, 6 feet 8 inches from control to electrical plug.
12 V Model Bed Warmers
Rated Maximum
Model Number Volts Watts Amps.
T36
12
75
6.3
Cord length is 3 feet 6 inches from warmer to Comfort Control and 6 feet 8 inches from control to electrical plug. (Our 12 volt units are not UL approved).
Manufactured by ElectroWarmth Products LLC513 Market Street P O Box A Danville,
Ohio USA 43014
Phone 800-990-4622
Fax 740-599-6848
www.ElectroWarmth.com

credit